COBHAM 7516A User Manual

98-175666-A Appendix F: Event messages F-9
List of events
08A04-0 ADM WARNING iDirect modem The ACU detected a warning/error in the iDirect
modem. Log into the modem for more information.
Info: 0x00000001: Temperature error
0x00000002: Test error 0x00000004: Fan error
(!V,!T)
08A05-0 ADM WARNING GX Core Module
heating
The GX core module heater is active. It will
automatically be cleared when the core module
reaches the operational temperature level. (!V,!T)
08B00-0 ADM INFO IoT med priority msg
rate exceeded.
The message rate limit has been reached for the
medium priority queue. The iothub client will pause
transmission of medium priority messages for a
short while.
08B01-0 ADM INFO IoT low priority msg
rate exceeded.
The message rate limit has been reached for the
low priority queue. The iothub client will pause
transmission of low priority messages for a short
while.
08B02-0 ADM INFO Iothub disabled The iothub client has been disabled.
09000-0 KDM ERROR KDM 3V3 supply Internal 3V3 voltage supply error in the KDM.
09001-0 KDM ERROR KDM 12V supply Internal 12V voltage supply error in the KDM.
09002-0 KDM ERROR KDM display Display hardware error in the KDM.
09010-0 KDM ERROR KDM link/SW version Link to the KDM module could not be established.
Either the KDM board is malfunctioning, or - if the
system software has just been updated - the
software is too old and is not compatible with the
KDM hardware.
0A080-0 Antenna ERROR EBUS loop
interrupted
EBUS communication error, loop interrupted.
0A081-0 Antenna ERROR ISCM error Communication error with ISCM. Info:
0x00000001: Key line signal
0A100-0 Antenna ERROR ISCM Gyro
communication
Internal communication error on ISCM.
0A101-0 Antenna ERROR ISCM Accelerometer
communication
Internal communication error on ISCM.
0A102-0 Antenna ERROR ISCM Magnetometer
communication
Internal communication error on ISCM.
0A103-0 Antenna ERROR ISCM IMU
communication
Internal communication error on ISCM.
0A104-0 Antenna ERROR ISCM OMT analog No analog communication to OMT. Check cable.
0A105-0 Antenna ERROR ISCM OMT digital No digital communication to OMT. Check cable.
0A106-0 Antenna ERROR ISCM ADC volt Voltage out of range.
ID Module Type Description Explanation
Table F-1: Event messages (Continued)

COBHAM 7516A Specifications

General

Brand	COBHAM
Model	7516A
Category	Antenna
Language	English