COBHAM 7516A - Page 152

98-175666-A Appendix F: Event messages F-10
List of events
0A107-0 Antenna ERROR ISCM Power good Internal PSU error.
0A108-0 Antenna ERROR ISCM Prod data Internal production data invalid.
0A180-0 Antenna WARNING ISCM Fan error BUC fan failure. Check fan movement.
0A181-0 Antenna ERROR ISCM No response No communication with ISCM. Check cable.
0A200-0 Antenna ERROR Azi Motor prod data Internal production data invalid.
0A201-0 Antenna ERROR Azi Motor ZRM No zero reference found. Check from motor to ZRM
and free movement of the antenna.
0A280-0 Antenna ERROR Azi Motor Driver fault Driver could not move antenna. Check free
movement of the antenna.
0A281-0 Antenna ERROR Azi Motor Power fault No power to motor driver. Check input power to
system.
0A282-0 Antenna ERROR Azi Motor Shutdown Internal error. Motor is shut down.
0A283-0 Antenna ERROR Azi Motor Over
temperature warning
Motor temperature too high.
0A284-0 Antenna ERROR Azi Motor Over
temperature fault
Motor temperature too high. Motor shut down.
0A285-0 Antenna ERROR Azi Motor Over
current fault
Over current protected activated. Check free
movement of antenna.
0A286-0 Antenna ERROR Azi Motor No
response
No communication with motor. Check cable.
0A300-0 Antenna ERROR Xel Motor prod data Internal production data invalid.
0A301-0 Antenna ERROR Xel Motor ZRM No zero reference found. Check from motor to ZRM
and free movement of the antenna.
0A380-0 Antenna ERROR Xel Motor Driver fault Driver could not move antenna. Check free
movement of the antenna.
0A381-0 Antenna ERROR Xel Motor Power fault No power to motor driver. Check input power to
system.
0A382-0 Antenna ERROR Xel Motor Shutdown Internal error. Motor is shut down.
0A383-0 Antenna ERROR Xel Motor Over
temperature warning
Motor temperature too high.
0A384-0 Antenna ERROR Xel Motor Over
temperature fault
Motor temperature too high. Motor shut down.
0A385-0 Antenna ERROR Xel Motor Over
current fault
Over current protected activated. Check free
movement of antenna.
0A386-0 Antenna ERROR Xel Motor No
response
No communication with motor. Check cable.
0A400-0 Antenna ERROR Ele Motor prod data Internal production data invalid.
ID Module Type Description Explanation
Table F-1: Event messages (Continued)