COBHAM 7516A - Page 153

98-175666-A Appendix F: Event messages F-11
List of events
0A401-0 Antenna ERROR Ele Motor ZRM No zero reference found. Check from motor to ZRM
and free movement of the antenna.
0A480-0 Antenna ERROR Ele Motor Driver fault Driver could not move antenna. Check free
movement of the antenna.
0A481-0 Antenna ERROR Ele Motor Power fault No power to motor driver. Check input power to
system.
0A482-0 Antenna ERROR Ele Motor Shutdown Internal error. Motor is shut down.
0A483-0 Antenna ERROR Ele Motor Over
temperature warning
Motor temperature too high.
0A484-0 Antenna ERROR Ele Motor Over
temperature fault
Motor temperature too high. Motor shut down.
0A485-0 Antenna ERROR Ele Motor Over
current fault
Over current protected activated. Check free
movement of antenna.
0A486-0 Antenna ERROR Ele Motor No
response
No communication with motor. Check cable.
0A500-0 Antenna ERROR Pol Motor prod data Internal production data invalid.
0A501-0 Antenna ERROR Pol Motor ZRM No zero reference found. Check from motor to ZRM
and free movement of the antenna.
0A580-0 Antenna ERROR Pol Motor Driver fault Driver could not move antenna. Check free
movement of the antenna.
0A581-0 Antenna ERROR Pol Motor Power fault No power to motor driver. Check input power to
system.
0A582-0 Antenna ERROR Pol Motor Shutdown Internal error. Motor is shut down.
0A583-0 Antenna ERROR Pol Motor Over
temperature warning
Motor temperature too high.
0A584-0 Antenna ERROR Pol Motor Over
temperature fault
Motor temperature too high. Motor shut down.
0A585-0 Antenna ERROR Pol Motor Over
current fault
Over current protected activated. Check free
movement of antenna.
0A586-0 Antenna ERROR Pol Motor No
response
No communication with motor. Check cable.
0B060-0 APSM WARNING NMEA 0183 parse
error
No valid NMEA input. Check NMEA 0183 cable.
(!T,!S)
0B061-0 APSM WARNING Heading data No valid heading input received. Check NMEA 0183
cable. (!T,!S)
0B062-0 APSM WARNING APSM AUX
temperature warning
Temperature too high. (!T,!S)
0B063-0 APSM ERROR APSM AUX
temperature failure
Temperature too high. AUX shut down. (!T,!S)
ID Module Type Description Explanation
Table F-1: Event messages (Continued)