COBHAM Explorer 510 - AT Commands

Appendix B: Command reference
98-143082-D AT commands 108
AT commands
The following most used AT commands are explained in this manual. Other AT commands not
mentioned here may still be supported.
Syntax conventions
Syntax definitions use the following conventions:
• <parm> indicates that a parameter (without < and >) can be filled in by the user.
• { <opt1> | <opt2> | … | NA } indicates that one of various options must be chosen by the
user. NA means no value is defined.
[<options>] indicates that <options> may or may not be included in the command.
• String parameters must be enclosed in double-quotes (ASCII 34) and numeric parameters
must not be. Only the ASCII double-quote is recognized; slanted quotes, e.g. from the
Windows-1252 or UTF-8 character sets, are not valid.
• Keywords and parameters are separated by commas.
• The command name and all keywords must be in upper case; most user-provided
parameters are case sensitive but may be either case.
• TE means Terminal Equipment - the equipment connected locally to the EXPLORER 510.
Note
AT commands related to data connections are only applicable to the BGAN
connection, not to the optional cellular connection.