98-143082-D To unpack and assemble the EXPLORER 510 5
Chapter 2
To get started
2
This chapter describes:
• To unpack and assemble the EXPLORER 510
• To switch the EXPLORER 510 on or off
• To connect your WLAN-enabled device
• To connect to LAN
• To access the web interface
• To access the external network
• To start and stop data connections
• To make phone calls over BGAN
• External power
To unpack and assemble the EXPLORER 510
Initial inspection
Inspect the shipping carton immediately upon receipt for evidence of damage during
transport. If the shipping carton is severely damaged or water stained, request that the carrier's
agent be present when opening the carton. Save the carton packing material for future use.
After unpacking the system, inspect it thoroughly for hidden damage and loose components or
fittings. If the contents are incomplete, if there is mechanical damage or defect, or if the
system does not work properly, notify your dealer.
WARNING! To avoid electric shock, do not apply
power to the system if there is any sign of shipping
damage to any part of the front or rear panel or the
outer cover. Read the safety summary at the front of this
manual before installing or operating the system.
To Next Page
Loading...
