Chapter 2: To get started
98-143082-D To unpack and assemble the EXPLORER 510 6
What’s in the delivery
The following items are included in the delivery:
•EXPLORER510 terminal
•AC/DC adapter
•USB to LAN Converter Cable
• EXPLORER softbag
•Getting started booklet
The EXPLORER Connect app
If you want to use your smartphone with the EXPLORER 510, install the EXPLORER Connect
app, which is available for iPhone at the Apple Store and for Android phones at Google Play.
The EXPLORER Connect app provides the following options:
To check the version of the EXPLORER Connect app
Check the version of your EXPLORER Connect app as follows (minimum IOS app ver 1.1/
Android app ver 1.9):
IOS:
1. On your iPhone or iPad select Settings (iPhone settings, not settings in EXPLORER
Connect app).
2. Scroll down to EXPL connect.
3. Select EXPL connect. The version is shown.
Android:
1. In the EXPLORER Connect app, from the main menu, select
(Settings) in the bottom
right corner.
2. Scroll down to Version.
Tile Function
Satellite Phone Use your phone as a satellite phone when connected to the
EXPLORER 510. For details, see To connect your smartphone for
making calls on page 15.
Terminal Access Start and stop data connections and
access all settings of the EXPLORER 510. See Configuration on
page 30.
Pointing Activate the pointing process for the EXPLORER 510 towards the
BGAN satellite. For details, see To point the antenna on page 11.
Dashboard See terminal and connection status. For details, see Status of the
EXPLORER 510 on page 29.
To Next Page
Loading...
