COBHAM Explorer 510 - Appendix C Conformity; CE Compliance; IC Compliance; FCC Compliance

Appendix B: Command reference
98-143082-D AT commands 109
M2M related AT commands
The following tables summarize some of the most used AT commands for M2M operation.
Parameters are explained in Parameters for ATCO commands on page 109 and Parameters
for other M2M related AT commands on page 113.
ATCO commands
The table below summarizes the ATCO commands, i.e. AT commands that can be used in the
SMS command ATCO.
Parameters for ATCO commands
Note
The EXPLORER 510 does not support BGAN M2M SIM cards nor over-the-air software
upgrade from the inmarsat FUP server.
Note
You can only use SMS commands over the BGAN network, not with a cellular
connection.
Command Parameters
_IATCROBST
a
a. Robustness for 3GPP LTE signals, not ATC
<enable>
_ICPWD
<type> <old passwd> <new passwd>
_IGETFILE
<ftp dir> <filename> <local dir> <ftp server> <ftp uname> <ftp passwd> [<apn>] [<apn uname>]
[<apn passwd>]
_IGETFW
<mode> [<ftp server>] [<ftp uname>] [<ftp passwd>] [<apn>] [<apn uname>] [<apn passwd>]
_IREMWEB
<enable> <ip_addr_lo> [<ip_addr_hi>] [<apn>] [<apn uname>] [<apn passwd>]
_ISENDFILE
<local dir> <filename> <ftp dir> <ftp server> <ftp uname> <ftp passwd> [<apn>] [<apn uname>]
[<apn passwd>]
_IUPDCFG
<filename>
_IUPDFW
<filename>
Parameter Values Meaning
<apn passwd> <apn passwd>
NA
Password for the APN.
Placeholder when no APN is specified.
<apn uname> <apn uname>
NA
User name for the APN.
Placeholder when no APN is specified.
<apn> <apn>
NA
APN name.
Placeholder when no APN is specified. The default APN from the SIM is used.