The web interface
98-145510-E Chapter 6: Setup and operation 6-24
6.1.16 Administration
In this section of the web interface you can configure the following administrative settings:
• Access to the administration settings (user name, password)
• User permissions (guest login)
• To import and export a system configuration
• Reset to factory default
Access to the administration settings (user name, password)
You can log on as an administrator or as guest (user name: guest, password: guest). The
Administration settings require an Administration user name and password. To log on as
administrator, do as follows:
1. Enter the IP address of the VSAT system.
2. If you are prompted, enter the Administration user name and password. If not, select
ADMINISTRATION and then enter the administrator user name and password.
The default user name is admin and the default password is 1234.
3. Click Logon.
4. Select ADMINISTRATION.
The Administration page is now updated to let you change the user name and password
or log off Administration.
To change the administrator password, do as follows:
1. In the ADMINISTRATOR > User login page, locate the section Change Logon.
2. Type in the new password and retype it on the next line.
3. Click Change. At the next logon the new password is required.
To reset the administrator password, do as follows:
1. Contact your service partner for a reset code. Report the serial number of the ACU. You
find it in the Dashboard, ACU serial number.
2. Click the link Forgot administrator password? on the LOGON page.
3. Type in the reset code obtained from your service partner and click Reset.
4. Type in the user name admin, the default password 1234 and click Logon.
To log off administration
If you have not entered anything for 30 minutes under ADMINISTRATION, you are
logged off automatically. To log off manually, click Logoff in the ADMINISTRATION
page.
6.1.17 User permissions (guest login)
You can manage user access to certain functions of the VSAT system. You can allow or
deny users that are not administrators (user name: guest, password: guest) access to certain
To Next Page
Loading...
