Chapter 2: Operation
24 Settings
Settings – General
General Description
Use GNSS
Systems
Select one of the following:
• GPS (default)
• GLONASS
• GPS / GLONASS
SBAS
Correction
System
Select one of the following:
• Disabled (no SBAS correction) (default)
• Automatic (Selects the most suitable correction system,
see below)
• EGNOS (Europe)
• MSAS (Japan)
• WAAS (North America and Hawaii)
• GAGAN (India)
• SDCM (Russia)
Enabling the use of an SBAS Correction System is on your
own responsibility. Note that beacon corrections have
precedence over SBAS corrections.
Accuracy
RAIM
Select the RAIM accuracy limit used in the RAIM
calculations. An alert will be reported when the limit is
exceeded.
Default: 10 m
HDOP Limit Swipe to change the HDOP limit. An alert will be reported
when the limit is exceeded.
Default: 4
Table 6: General settings
To Next Page
Loading...
