Chapter 2: Operation
Trip Counters 21
22222
Operation
Trip Counters
The GNSS/DGNSS Receiver has two trip counters and a total counter. The
trip counters are updated when the system is switched on and a valid
position is available. When the system is switched on, but there is no valid
position, the travelled distance will be added to the counters when a
position is obtained again. The trip counter one and two can be reset. The
total counter is reset after a reset to factory default settings of the
GNSS/DGNSS Receiver.
Figure 23: Trip Counters (example)
To Next Page
Loading...
