Chapter 2: Operation
Settings 29
22222
Operation
5. To display the valid range tap and hold the field.
Settings – Radio Beacons
Figure 28: To display the valid range (example)
Radio Beacons Description
Differential
Beacon
Correction
Select one of the following:
• Enabled (default)
• Disabled
In GNSS systems the setting Differential Beacon
Correction is replaced by External RTCM
Correction.
RTCM Correction
Age
This parameter sets the maximum allowed age for
correction data.
Range: 10-900 s
Default: 120 s
Note: When increasing the allowed correction age,
ensure that the new setting meets your requirements as
accuracy may degrade with increasing correction age.
Table 7: Settings for radio beacons
To Next Page
Loading...
