12
1300 663 907
After Sales Support
help@cocoonproducts.com.au
Model number:
HE210303
02/2022
8CH 1080P SECURITY CAMERA SYSTEMDVR INITIAL SETUP
Installation Location
Before installing the Security System, it is essential to plan where to locate the DVR unit.
Below are a few points to consider:
• The DVR unit should be positioned in a central location with easy access to mains
power, cameras and installed cables
• If you plan to view footage over the internet or on your mobile phone, the DVR unit
should also be located near and connected to your modem / router or ethernet
network point
• Plan out where you would like to place your cameras and test all connections BEFORE
permanently installing cables and cameras
• The DVR unit should be installed in a secure location to avoid tampering
• Do not place heavy objects on top of the DVR unit
• Do not block ventilation holes on the sides of the DVR unit or use in an enclosed area as
this may cause overheating
• Cameras should be placed coverly indoors where you do not want to see them every
day
• Cameras can be placed in plain sight to act as a deterrent to would-be intruders
• Cameras are weatherproof, however if installed outside should be done in protected
areas, such as under eaves
Once you have decided the location of the cameras and the DVR unit itself, use the
supplied screws to install the cameras in place and setup the DVR unit as per the
instructions provided in “DVR Unit Connections” on page 11.
Once this is completed, you can setup the basic features of the DVR.
To Next Page
Loading...
