Cocoon HE210303 - Managing User Accounts and Permissions

27
1300 663 907
After Sales Support
help@cocoonproducts.com.au
Model number:
HE210303
02/2022
8CH 1080P SECURITY CAMERA SYSTEMADVANCED SETTINGS
DDNS tab
Some internet providers operate using DDNS or Dynamic DNS IP addresses. As opposed
to a ixed Static IP, a DDNS IP is dynamic and constantly changing. This type of IP address
is a problem for your DVR unit unless your setup a service to manage this. Forunately,
there are many services available that can do this for you. However, some may ask for a
nominal fee for their services.
• DDNS: Toggle to enable/disable the DDNS settings
• DDNS server: Choose your DDNS provider from the drop-down list
• Username: Enter your DDNS provider username
• Password: Enter your DDNS provider password
• Host Domain: Enter your host name provided by your DDNS provider
• DDNS Update [Hours]: Set the frequency that the DVR should check for DDNS
updates
• UPNP: Toggle to enable/disable UPNP
Users
Conigure all user settings using the following steps. Your Cocoon Security System can
limit speciic MAC addresses for additional security.
Adding a new user
1. Press the ‘Add’ button at the bottom of the User Management sub-menu
2. Set the User Name as desired, then input the desired password
3. Select between Normal and Advanced user type:
• Normal: Allows remote login and local log in to view cameras
• Advanced: Allows full access to view cameras, search logs, ile management, except
for being able to shut down the DVR
• For more speciic settings, such as being able to shut down the DVR, select the
‘Authority’ tab and conigure access control for each camera and feature
4. Optional: Bind the user to a speciic MAC address by enabling ‘Binding PC MAC
Address’ and entering the MAC address below
5. Authority: User speciic authority settings
6. Press ‘OK’ to add new user
Deleting a user
Whilst logged into your DVR’s admin account, highlight an existing user by clicking on the
user with the mouse. Press the ‘Delete’ button and then press ‘OK’ to conirm.
Changing a user’s password
Whilst logged into the user’s account, highlight an existing user by clicking on the user
with the mouse. Press the ‘Change Password’ button and enter the old password, as well
as your new password. Press ‘OK’ to conirm.