Cocoon HE210303 - Search, Backup, and System Information

28
1300 663 907
After Sales Support
help@cocoonproducts.com.au
Model number:
HE210303
02/2022
8CH 1080P SECURITY CAMERA SYSTEMADVANCED SETTINGS
Advanced
Reset: Reset all settings to factory default
NOTE: time and language will not be reset.
Impor/Expor: Expor the parameters of your device onto a removable storage device.
1. Inser a USB lash drive up to 32GB into the rear of the DVR
2. Select the ‘Impor’ or ‘Expor’ button to impor or expor your DVR settings
System Maintenance: Clears cache to free up storage space.
Main Menu - Search
To access the ‘Search’ settings, select ‘Search’ from the Main Menu. Choose the tabs at
the top to switch between sub-menus. The ‘Search’ menu provides access to playback
recordings and backup to lash drive.
NOTE: The DVR may take some time to retrieve all your recordings
Time Search tab
Search for footage recorded on a given day.
1. On the right-hand side, select the date to search, then press ‘Search’
2. Light blue bars indicate found recordings. Using the mouse, select a star time on the
display, or enter known time and date to view speciic times
3. Press the play button to commence playback from the DVR to your monitor
Event Search tab
Search for motion events that the DVR has detected.
1. On the right-hand side, select the date to search, then press ‘Search’
2. A list of detected motion recordings will be shown. Double-click on an entry to
commence playback from the DVR to your monitor
Image tab
Search for images captured on the DVR.
1. On the right-hand side, enter the star and end times to search, then press ‘Search’
2. A list of image iles will be shown. Double-click on a ile to view
Main Menu - Backup
Backup allows you to transfer recordings to a USB lash drive up to 32GB formatted to
FAT32.
1. Inser a USB lash drive into the rear of the DVR unit
2. On the right-hand side, enter the star and end times to search, then press ‘Search’
3. A list of footage iles that have been recorded by the DVR will be shown. Select your
desired iles for expor by ticking the ile
4. Once selected, press the ‘Backup’ button, then press ‘Star’
5. Wait until the backup is complete before exiting and removing the USB lash drive
NOTE: If the USB has insuicient space for transfer, select ‘Disk Cleanup’. Files can now be
highlight and deleted using the ‘Delete’ button