Preparing the transceiver for use
Manpack Transceiver 2110 series Getting Started Guide 23
3123 Green, solid The charger has an appropriate power
supply connected.
Off The charger does not have an appropriate
power supply connected, or is not
functioning correctly.
OUTPUT Yellow, solid The charger is charging the battery pack.
Yellow, slow
flash
The charger has finished charging the
battery pack.
Yellow/Red,
alternating
flash
The battery pack has an overtemperature
condition.
Red, double
flash then
long pause
The battery pack has a faulty fuse.
Red, rapid
flash
The battery pack is unserviceable and
cannot be charged.
WARNING
The battery pack should be charged with the
connector facing upward and the vents clear of
obstructions so that any gas created during the
charging process is released.
CAUTION
Provide clear notification that charging is
underway. Ensure there is adequate ventilation
around the battery pack during charging.
Table 4: LED indications (cont.)
Charger
type
LED Status Meaning
To Next Page
Loading...
