Definitions
80 Manpack Transceiver 2110 series Getting Started Guide
listen before
transmit
If enabled, the automatic process that the
transceiver uses to detect whether or not
there is traffic on a channel and, when
necessary, select another channel or inform
the user that the channel is busy.
LQA beacon A Channel Test call made in an
ALE/CALM network using a Group
Selective or NET address syntax. On
completion of the beacon, the information
collected replaces the information for the
channel stored in the LQA database. It is
sometimes referred to as an ALE beacon.
The LQA beacon is available if the MIL-
STD-188-141B ALE option is installed
(2110 only).
macro A short set of instructions to automate a task
you perform with the transceiver. When a
macro is assigned to a key, the key becomes
a hot key.
manual sounding A Channel Test call made in an
ALE/CALM network using the text
SOUNDING as the call address. The
station performs a sounding operation,
which other stations use to update the
information in their LQA database.
Manual sounding is available if the MIL-
STD-188-141B ALE option is installed
(2110 only).
Message call A call that enables you to send a message to
a specific station.
This term Means...
To Next Page
Loading...
Need help?
General
