Block Up Converter Systems 6700/6900 series User Guide 1
CODAN
Introduction
This user guide is for installation technicians and operators of
the Block Up Converter 6700/6900 series.
This guide contains the following sections:
Section 1 Overview—general description of the BUC
Section 2 Installation—installation instructions specific to
the BUC and redundancy systems
Section 3 Setting up and operating the BUC system—
setup and operating procedures, and serial
interface commands
Section 4 Maintenance and fault finding—description of
how to maintain and fault find a BUC and a
redundancy system
Appendix A BUC model and redundancy system numbers—
explains how to interpret the model number of
your BUC and redundancy system
Appendix B Example outputs for the View commands—
summary of the commands described on
page 57, Setting up and operating the BUC
system
Appendix C Compliance—compliance information and
safety notices
Appendix D Definitions—explains the terms and
abbreviations used in this guide
An index can be found at the end of the guide.
To Next Page
Loading...
Need help?
General
