Codan 6700 Series User Manual

Setting up and operating the BUC system
Block Up Converter Systems 6700/6900 series User Guide 63
Serial interface commands
This section describes the serial interface commands you can
use to set parameters and display information about the BUC.
The descriptions given are based on using ASCII protocol.
The commands consist of a 3-letter mnemonic and, in some
cases, command data.
Generally, the first letter of the command determines the type
of command (that is, H = Help, S = Set, O = Output,
V = View, R = Reset) and the last two letters uniquely define
the command.
The BUC is insensitive to the case of the command text.
NOTE
For example output of a command set see
page 115, Example outputs for the View
commands.
For the... See...
Help commands Table 13 on page 64
Set commands Table 14 on page 65
Output commands Table 15 on page 72
View commands Table 16 on page 73
Reset commands Table 17 on page 74

Codan 6700 Series Specifications

General

Brand	Codan
Model	6700 Series
Category	Media Converter
Language	English