Example outputs for the View commands
116 Block Up Converter Systems 6700/6900 series User Guide
View fault status
View identity and configuration data
View limit data
The data displayed depends on the model of the BUC and the
current LO setting.
-------------Fault Status-------------
Current Latched
PA OK OK
Fan OK OK
Tx Power Alarm OK OK
BUC Temp OK OK
LO OK OK
Internal OK OK
LNB - -
Red'cy Controller - -
--------------------------------------
NOTE
If there is no fan in the BUC, the current and
latched status for the fan shows a dash.
--------------------------Identity Data----------------------------
Model No 6704/48 Serial No 3232676a0005
Firmware P/No 90-20621-001 Firmware Version 1.06
-------------------------------------------------------------------
-----------------------Limit Data---------------------------
Min Tx IF Freq 950 Max Tx IF Freq 1525
Min Tx RF Freq 5850 Max Tx RF Freq 6425
LO1 Freq 7300 LO2 Freq 7600
LO3 Freq 7375 LO4 Freq 7675
Min Power Meter 19.0 Max Power Meter 36.0
-----------------------------------------------------------
To Next Page
Loading...
Need help?
General
