Overview
26 Block Up Converter Systems 6700/6900 series User Guide
The Remote Controller 6570 and Hand-held
Controller 6560
The Remote Controller 6570 provides remote control and
monitoring facilities of the BUCs at a convenient indoor
location. The remote controller is connected via its BUC
Interface connector to the Auxiliary I/O connector on the
redundancy controller using the cable supplied.
The Hand-held Controller 6560 provides local control and
monitoring facilities of the BUCs at the outdoor-mounted
redundancy controller. A hand-held controller may be
connected to the BUC 1 Serial or BUC 2 Serial connector.
Alternatively, a BUC may be directly controlled by the hand-
held controller by disconnecting the M/C cable from the
M/C connector on the BUC, and connecting the hand-held
controller in its place.