Compliance
122 Block Up Converter Systems 6700/6900 series User Guide
Protection of the radio spectrum
It is the responsibility of the user to ensure any modem used in
conjunction with the Block Up Converter 6700/6900 series
and Redundancy Controller 6586 complies with EN 301 428
or EN 301 443 so that CE-certification with respect to radiated
spurious signals is maintained. If necessary, contact Codan for
more information.
To set up the BUC for CE-certified operation you must:
1 Enter the STD0 command.
This sets the default transmit state on powerup to Off.
1 Enter the STO1 command to activate the BUC.
Health requirements (human exposure to
electromagnetic fields)
The Block Up Converter 6700/6900 series and Redundancy
Controller 6586 have been assessed against the health
requirements in article 3.1a of the R&TTE Directive
(1999/5/EC) complying with VDE0848, ICNIRP and FCC
health requirements.
The Redundancy Controller 6586 is non-transmitting ancillary
equipment according to ETSI EN 301 428 and ETSI EN 301
443, and does not cause or increase the risk of human
exposure to electromagnetic fields.
CAUTION
Some countries may restrict the use of satellite
communications equipment on certain
frequency bands or require such equipment to
be licensed. It is the user’s responsibility to
check the specific requirements with the
appropriate communications authorities.
To Next Page
Loading...
Need help?
General
