COMPLIANCE
EMC AND SAFETY NOTICES
98 Envoy™ Transceiver Getting Started Guide
To ensure electrical safety:
1 Use the standard AC mains cable supplied.
1 Ensure the covers for the equipment are fitted correctly.
CAUTION: If it is necessary for a qualified electronics
technician to remove the covers during servicing,
they must be refitted correctly before using the
equipment.
WARNING: A protective earth connection must be included
in the mains wiring to the 3020 Transceiver
Supply.
WARNING: The protective cover must always be fitted when
the 3020 Transceiver Supply is connected to the
AC mains.
Earth symbols
Chassis earth connection points are provided on the Envoy™
Transceiver and 3020 Transceiver Supply. A protective earth is
provided in the AC mains wiring of the 3020 Transceiver Supply.
This protective earth must be connected at the AC mains supply
outlet. The symbols shown below are used to identify the earths on
the equipment.
Table 6: Earth symbols
Symbol Meaning
Chassis earth
Protective earth
To Next Page
Loading...
Need help?
General
