NAVIGATING THE MENU STRUCTURE
ENTERING TEXT IN A FIELD
40 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Entering special characters
You can enter special characters in messages and names, and in
addresses of stations that you call.
NOTE: If the FED-STD-1045 ALE/CALM option or
MIL-STD-188-141B ALE option is installed in
your transceiver, the key may be used to enter
the global ALL address syntax (@?@) or special
ALE addressing characters easily.
To enter a special character:
1 To enter a special character in a text field:
• Press or to move the cursor to the point where
you want to insert a special character.
• Press to cycle through the available choices or
hold to see the available special characters.
Depending on the context, you can select from:
1 Press , , or to highlight the character that you
want to use, then press (Insert).
1 Repeat as required.
To Next Page
Loading...
