CR2 User’s Manual Draft_022803_AS - 92
CR2 User’s Manual Draft_022803_AS - 93
Insert the CR2 Firmware CD in a host computer and copy the CR2 Firmware folder on the CD
to your Desktop. If you were emailed a version, please save the les included in the email to
the Desktop in a folder called CR2 Firmware.
In the CR2 Firmware folder on the Desktop, open the CR2 Firmware Dowloader software by
double-clicking on the red arrows Icon.
Attach your CR2 unit to the host with the USB interface.
Scan the code below to set the CR2 unit to USB Native Communication mode:
USB Native
Verify that your CR2 unit is detected by the CR2 Firmware Dowloader software by checking
if the devices name appeards in the USB Device window (gure 1).
With the browse button select the rmware le to download. The correct le is located in the
CR2 Firmware folder on the Desktop. Highlight the le and click Open.
1
2
3
4
6
5
gure 1
Instructions for Downloading CR2 Firmware
gure 2
To Next Page
Loading...
Need help?
General
