Code CR2700 User Manual

43
The host receives incorrect data
or misses characters
Incorrect Keyboard language
Use M-code to set the keyboard
language to correspond to your
system settings.
Incorrect Communication
Protocol
Find and scan the M-Code to set
raw data or package data.
When power gauge on battery is
pressed, no LEDs on the battery
turn on
Battery may be out of power
Charge the battery or replace
with a freshly charged one. When
charging, make sure battery LEDs
are blinking.
Battery is malfunctioning
Replace the battery with a
functioning one.
The reader beeps three times
Reader failed to connect to a
Bluetooth charger
Make sure the charger is
powered up (Wireless logo on the
charger is lit or blinking) and scan
the QuickConnect Code again.
Decodes but fails to transfer data
Make sure scanner is connected
to charger base by scanning the
Quickconnect code.
Cannot connect with my
Bluetooth device
Device does not support
Bluetooth Low Energy connection
Use a compatible device that
supports Bluetooth Low Energy
The reader beeps and vibrates
four times after scanning
configuration code
Reader successfully decodes but
fails to process configuration
code
Make sure to use the correct
configuration codes for the
reader
Wireless LED on reader flashing
one time per second
Reader is not connected to a
charger or host (PC, tablet,
mobile phone that supports
Bluetooth Low Energy)
Move the reader into the
Bluetooth range of a
charger/host.
Scan the QuickConnect Code on
the charger to pair and connect.
Use Device Manager on the host
to pair and connect with the
reader
Wireless LED flashes once every
10 seconds
Reader is in sleep mode and out
of charger
Place reader in charger or press
any button to wake the reader up
Scanner beeps until a button is
pressed
Paging has been turn on
Beeps until a reader button is
pushed, paging button the
charger is touched for more than
1 second, or paging times out (30
seconds by default)
Page button does not work
No reader is connected or reader
is out of range. Paging LED
flashes 3 times when touched for
more than 1 second
Scan QuickConnect code to
paired the scanner with the
charger or bring the reader in
range of the charger.
Wireless LED Flashes fast 7 times,
no data can be sent
Base is attempting to connect to
a reader
Make sure scanner is on and in
range
Reader scans PDF code on
driver’s license but does not
parse the data
Reader may require a parsing
license
Contact sales rep. to purchase a
DL parsing license, which can be
installed by scanning a barcode
provided by Code.
Reader is not correctly configured
for driver’s license parsing
Make sure the correct parsing
file/JavaScript has been loaded to
the reader.

Code CR2700 Specifications

General

Brand	Code
Model	CR2700
Category	Barcode Reader
Language	English