CODEL Tunnel Tech 700 Series User Manual

Technical Manual CODEL
53
 Press to move cursor to next most significant digit. Repeat
above procedure to increment or decrement and press to
move cursor to next digit and finally press to exit EC3 Offset
8.3.3.3. VIS Span Factor: Allows user to adjust VIS Span Factor.
 Use or to scroll through to VIS Span Factor.
 The most significant digit is highlighted use or to
Increment or Decrement.
 Press to move cursor to next most significant digit. Repeat
above procedure to increment or decrement and press to
move cursor to next digit and finally press to exit VIS Span
Factor.
8.3.3.4. VIS Offset: Allows user to adjust VIS Offset.
 Use or to scroll through to VIS Offset.
 The most significant digit is highlighted use or to
Increment or Decrement.
 Press to move cursor to next most significant digit. Repeat
above procedure to increment or decrement and press to
move cursor to next digit and finally press to exit VIS Offset.
8.3.4. Exit: Allows user to exit to setup mode submenus.
 Use or to scroll through to Exit and press to exit
to Setup mode submenus.
VIS Span Factor
00.000
Set VIS S.F
00.000
VIS Offset
0000
Set VIS Offset
00000
EXIT
Enter to Exit
4. Setup Mode
4.4. Span Factor

CODEL Tunnel Tech 700 Series Specifications

General

Brand	CODEL
Model	Tunnel Tech 700 Series
Category	Measuring Instruments
Language	English