CODEL Tunnel Tech 700 Series User Manual

Technical Manual CODEL
54
8.4. mA Output: Allows user to setup mA output configuration. The following are
the submenus.
 mA Output
 Abs Location
 Type
 Validity State
 Smoothing Coeff
 Span
 Zero
 4 mA DAC
 20mA DAC
 Use or to scroll through to mA output submenu.
 Press to access mA output sub menus.
8.4.1. Abs Location: Allows user to set up the absolute data location for mA
output configuration. The following are submenus.
 Abs Location
 Set Abs Location
8.4.1.1. Set Abs Location: Allows users to set the absolute data location.
 Press to access and Set Abs Location sub menu.
 The most significant digit is highlighted use or
to Increment or Decrement in hexadecimal.
 Press to move cursor to next most significant digit.
Repeat above procedure to increment or decrement
and finally press enter to exit Set Abs Location.
8.4.2. Type: Allows user to setup mA range.
 Use or to scroll through mA output submenus.
4. Setup Mode
4.45. mA Output
Abs Location
0x01F6
Abs Location
0x01F6
Abs Location
0x01F6
Type:
4.00 – 20.00mA

CODEL Tunnel Tech 700 Series Specifications

General

Brand	CODEL
Model	Tunnel Tech 700 Series
Category	Measuring Instruments
Language	English