CODEL Tunnel Tech 700 Series User Manual

Technical Manual CODEL
61
8.5.3.1. Set Direction: Allows users to set direction status of relay.
 Press to access Set direction sub menu.
 The Relay State Options.
Normal
Reverse
 Use or to scroll through different relay state
options and press to exit.
8.5.4. Level: Allows user to set up the alarm level. The following are the
submenus.
 Level
 Set Level.
 Use or to scroll through to Level submenu.
8.5.4.1. Set Level: Allows user to set alarm level.
 Press to access alarm level submenu.
 Use or to change alarm level in hexadecimal.
 Press to move cursor to next most significant
digit. Repeat above procedure to increment or
decrement and finally press to set Span range
and exit.
Direction:
Normal
Set Direction:
Normal
Set Direction:
Reverse
Direction:
Reverse
Level:
0x0064
Set Level:
0x0064
Set Level:
0x0064
Set Level:
0x0064
Set Level:
0x0034
Set Level:
0x0064

CODEL Tunnel Tech 700 Series Specifications

General

Brand	CODEL
Model	Tunnel Tech 700 Series
Category	Measuring Instruments
Language	English