To Next PageTo Next Page
Need help?Do you have a question about the Codonics Horizon Series and is the answer not in the manual?
Explains manual conventions like bullets, numbering, and text formatting for clarity.
Explains how to navigate menus using paths.
Describes visual representation of control panel keys.
Explains the use of notes and tips in the manual.
Alerts users to potential hazards and safety concerns.
Explains formatting for text files and display.
Details how user input is represented.
Covers emphasis, commands, paths, and filenames.
Introduces and defines new terms.
Outlines the manual's purpose and the imager's capabilities.
Provides contact details for technical support and product info.
Covers safety, warnings, and operational limitations.
Shows locations of safety and compliance labels.
Explains electrical and safety warnings.
Discusses laser safety precautions and warnings.
Warns about hot surfaces and components.
States compliance with regulations.
Explains serial and configuration labels.
Warns about electrostatic discharge precautions.
Discusses RF interference.
Discusses radio/TV interference.
Covers EMI/EMC guidelines.
Lists general safety precautions for imager use.
Details environmental and location requirements.
Provides precautions for cleaning the imager.
Discusses media handling and disposal.
Explains file transfer methods.
Discusses image settings for color management.
Explains image scaling features.
Discusses variations based on hardware.
Outlines product disposal requirements.
Specifies the intended use of the imager.
Welcomes user and congratulates on purchase.
Describes key features of the Horizon imager.
Explains various input sources for images.
Lists supported image file formats.
Guidelines and requirements for preparing imager installation.
Step-by-step instructions for unpacking and installing the imager.
Details how to connect the imager to a network.
Instructions for assigning an IP address to the imager.
Identifies and locates main imager components.
Instructions for powering the imager on and off.
Explains how to interpret the imager's status screen.
Describes the layout and functions of the control panel display.
Details the types of media cassettes and their loading.
Step-by-step guide for loading and replacing media cassettes.
Best practices for handling and storing imager media.
Instructions for replacing the color ribbon.
Overview of DICOM as an industry standard for medical imaging.
Explains the importance and availability of conformance statements.
Describes the two participants in a DICOM print job transaction.
Steps to configure DICOM applications for Horizon imager printing.
Explains PostScript printing technology and workflow.
Guide to printing from Windows applications via PostScript.
Guide to printing from Macintosh applications via PostScript.
How to save and use custom print settings as presets.
Instructions for sending files to the imager using FTP.
Provides examples of using LPR for printing jobs.
How to set media type and size when printing with LPR.
How to modify default media and parameter settings.
Procedures for setting default media for grayscale and color images.
How to revert custom settings to factory defaults.
Compares DirectVista for grayscale and ChromaVista for color images.
Best practices for viewing printed images for accurate assessment.
Steps to print gamma/contrast/saturation sheets from DICOM.
How to adjust image parameters for DirectVista media.
Lists periodic maintenance tasks and their procedures.
Describes available cleaning kits for imager maintenance.
Detailed instructions for cleaning the thermal print head.
Procedures for cleaning the imager's platen and donor guide.
Process for calibrating the imager with DirectVista grayscale film.
Explains how to get status information from the control panel and error log.
Lists common problems, their causes, and solutions.
Step-by-step guide for clearing sheet jams.
How to manually enter barcode data if reading fails.
Visual representation of the imager's control panel menu structure.
Shows the menu options for powering the imager on/off and rebooting.
Illustrates the menu paths for setting default media and user preferences.
Details the menu structure for creating and managing custom job settings.
Lists technical specifications of the Horizon imager in English.
Details operating and storage environmental requirements.
Table detailing system job settings files and their corresponding uses.
Details parameters related to print jobs, such as media size and priority.
Lists parameters that control sheet layout and appearance.
Describes parameters that adjust image quality like gamma, contrast, and scaling.
Index entries starting with numbers.
General alphabetical index entries.
General