To Next PageTo Next Page
Need help?Do you have a question about the Codonics Horizon and is the answer not in the manual?
Details electrical safety precautions, grounding, and warnings.
Explains laser safety, specifications, and warning labels.
Warns about hot surfaces and provides temperature guidelines.
Provides electrostatic discharge precautions for connecting equipment.
Details environmental and placement requirements for the imager.
Provides guidelines and requirements for preparing the imager installation.
Details the unpacking and physical installation process of the imager.
Explains how to connect the network cable to the imager for network connectivity.
Guides the user through the initial power-on procedure for the imager.
Explains how to configure the imager for a simple network setup.
Details how to define a unique IP address for the imager on the network.
Explains how to load media cassettes and optionally a ribbon.
Explains how to change the default service login password for security.
Explains how to save current imager configuration settings to backup media.
Provides step-by-step instructions for saving configuration to Zip or USB media.
Details the process of restoring imager settings from backup media.
Details the procedures for powering the imager on and off.
Explains the steps to power on the imager and what to expect.
Describes how to interpret the imager's status from the control panel display.
Provides the procedure for safely powering off the imager.
Details the layout and function of the imager's control panel.
Describes how alert/fault messages and tones are presented and managed.
Guides the user on how to navigate menus and enter data via the control panel.
Provides step-by-step instructions for inserting or replacing media cassettes.
Details the procedure for replacing the color ribbon in the imager.
Guides on configuring DICOM applications to support Horizon imager printing.
Explains how to select the imager and send a print job from a DICOM application.
Explains how to specify media type and size using PostScript parameters.
Guides on printing from Windows applications using the imager.
Provides specific instructions for changing parameters on Windows 98/Me.
Provides specific instructions for changing parameters on Windows NT.
Provides specific instructions for changing parameters on Windows 2000/XP.
Guides on printing from Macintosh applications using the imager.
Explains how to select Horizon media and type in Macintosh applications.
Details how to configure PostScript parameters for Macintosh printing.
Introduces FTP for sending print jobs and image files.
Introduces LPR for sending print jobs and explains its command syntax.
Guides on setting media type and size for FTP print jobs.
Guides on setting media type and size for LPR print jobs.
Explains the concept of default settings and their importance.
Details how to change default media and sheet/image parameters.
Guides on setting default media types and sizes for grayscale and color images.
Explains how to modify default sheet and image parameter settings per media type.
Guides on resetting imager settings back to factory defaults.
Explains how to reset default media selections for grayscale or color.
Guides on resetting default user settings for all media types to factory defaults.
Guides on printing GCS sheets via DICOM.
Guides on printing GCS sheets via PostScript.
Explains how to find best gamma and contrast for DirectVista media.
Guides on finding best gamma, contrast, and saturation for ChromaVista media.
Guides on printing MCM sheets via DICOM.
Outlines a schedule for periodic preventive maintenance tasks.
Provides detailed steps for cleaning the thermal print head and nosepiece.
Details the procedure for cleaning the platen roller and donor guide bar.
Explains how to clean the pick tires that feed media.
Explains the process of film calibration for DirectVista film.
Provides tables for troubleshooting startup, print jobs, and jams.
Lists common startup and print job issues and their solutions.
Lists common sheet jam issues and their solutions.
Lists common image quality issues and their solutions.
Lists common issues related to media cassettes and ribbons.
Provides general instructions for clearing a sheet jam.
Guides on clearing jams originating from a cassette.
Guides on clearing jams occurring in the printing area.
Provides contact information and advice for technical support.
Details how to set default user preferences for media types.
Explains how to set default media for grayscale or color images.
Describes the menu structure for creating and managing custom job settings.
Outlines the menu structure for configuring network settings.
Introduces tables summarizing print job parameters adjustable via menus and files.
Summarizes job-level parameters like Media Size, Type, Priority, and Receive Tray.
Summarizes image-level parameters like Antialias, Contrast, Gamma, MCM, Nudge, Polarity, Rotate, Saturation, Scaling.
Medical Color Matching to align printed colors with monitor display.
General| Media Size | 8x10 in, 10x12 in, 11x14 in, 14x17 in |
|---|---|
| Connectivity | Ethernet |
| Grayscale Resolution | 14 bits |
| Film Supply | Dual roll system |
| DICOM Conformance | DICOM |
