Codonics Horizon - Using Job Settings Files with DICOM

5-6 Printing from DICOM Applications
Typically, you will be able to specify any needed print job setting
from within your DICOM user application (for example, the media
type and size, or the contrast setting for an image). However, it is
possible that there is a job setting supported by the Horizon imager
that cannot be specified in your DICOM application. Using the
Horizon imager’s Job Settings feature, you can work around this
limitation.
The Horizon imager supports multiple Job Settings files, each of
which can define unique sets of sheet and image settings. A Job
Settings file can specify values for each of the Horizon sheet and
image settings, or only a subset of those settings.
For example, say your DICOM application does not support
specifying the media type and size. A Horizon Job Settings file that
does specify a particular type and size can be used to perform this
function.
`~íÉÖçêáÉë=çÑ=gçÄ=pÉííáåÖë
There are two categories of Job Settings:
• System Job Settings. These Job Settings files come
preconfigured in the Horizon imager. They include a job setting
for each media type and size combination, for the three receive
trays, and for the three job priorities. For a complete list of the
system Job Settings files, refer to Appendix C.
• Custom Job Settings. These Job Settings files are created at the
user site. They can be created at the control panel, or by sending
an ASCII text file that includes the settings and their values to
the Horizon imager via FTP or LPR protocols. The procedures
for creating custom Job Settings files are described in the
Horizon Imager Technical Manual .
rëáåÖ=gçÄ=pÉííáåÖë=cáäÉë=ïáíÜ=af`lj