Horizon Imager User’s Manual 9-11
Adjusting Image Appearance
mêáåíáåÖ=j`j=_ê~ÅâÉíáåÖ=pÜÉÉíë=rëáåÖ=
af`lj
To print MCM bracketing sheets from DICOM, configure the Image
Display Format to
CUSTOM\8
from within your DICOM user
application.
If you do not specify the media type and size for the bracketing
sheet from within the DICOM user application, then the Horizon
imager determines whether the image is grayscale or color. The
imager then uses the Default Media defined for that type of image,
and the Default User Settings defined for that media type and size.
For more information about how to define the Default Media
selection and Default User Settings, refer to “Changing the Default
Media Type and Size” on page 8-3 and “Changing Default User
Settings for a Media Type” on page 8-5.
Once a bracketing sheet is printed, you can use it to determine
which MCM setting you want to use.
mêáåíáåÖ=j`j=_ê~ÅâÉíáåÖ=pÜÉÉíë=rëáåÖ=
mçëípÅêáéí
To print MCM bracketing sheets via PostScript, set the Sheet Layout
parameter to
MCM Bracket,
and specify the media type/size using
the Media Type and Media Size settings. For more information
about changing parameter settings when printing via PostScript,
refer to Chapter 6.
Once a bracketing sheet is printed, you can use it to determine
which MCM setting you want to use.
To Next Page
Loading...
