Horizon Imager User’s Manual 8-7
Default Print Job Settings
If you configured your own default settings, you can reset them to
the factory defaults at any time.
Resetting to the factory default settings applies only to new
incoming print jobs. Jobs already queued for printing are printed
using the default settings that were in effect when the print job was
received.
oÉëÉííáåÖ=í ÜÉ=aÉÑ~ìäí=jÉÇá~=pÉäÉÅíáçåë
You can reset the Default Media selections for grayscale or color
images back to the factory-default selections.
1. At the imager’s control panel, press the key.
The Main Menu displays.
2. Select the following menu options:
Default Media
Reset Default Media
You are prompted to confirm the reset.
3. Respond to the confirmation prompt.
The factory-default selections are restored.
oÉëÉííáåÖ=íç=c~ÅíçêóJaÉÑ~ìäí=p ÉííáåÖë
CAUTION
If the imager’s settings were changed from the factory defaults
prior
to
being shipped (for example, to accommodate a special OEM configuration), resetting
to the factory defaults will not restore the “as shipped” settings. Instead, they will be
reset to the standard factory default values.
CAUTION
Resetting to the factory defaults will affect prints made by other users. Use
caution when changing default settings. Typically, it is better to specify sheet and
image parameter settings from the DICOM application or a PostScript printer’s
settings, or use a Job Settings file that contains the values you need. For information
about Job Settings files, refer to the Horizon Imager Technical Manual.
8
To reset the
Default Media
selections to
their factory
defaults
MENU
To Next Page
Loading...
