Horizon Imager User’s Manual 3-21
Basic Imager Operations
11. Press the or key to leave the Network Settings menu.
A message states that the imager will automatically reboot when
you press the key to exit the Main Menu.
12. Press the key to acknowledge the message.
13. When you are finished specifying the IP address and want to
exit the Main Menu, press the key.
Because the IP address was redefined, the imager reboots so
that it can be identified properly on the network.
Cancelling Your Changes in a Screen
To exit a screen without saving your changes, press the key.
Your changes are ignored and the previous menu up in the
hierarchy is displayed.
Exiting the Menus
To exit the menus, press the key. You are returned to the Status
screen.
pìãã~êó=çÑ=jÉåì=`çåîÉåíáçåë
The menu displays include the following conventions:
•
As you move down into the menu structure, the menu path you
have taken is always shown. The hierarchy of chosen menu
items is sequentially indented.
•
A menu option that is followed by ellipses (...) indicates that
selecting that option will display a follow-up screen for viewing
additional options, entering data, or viewing information.
•
Current settings are displayed in square brackets. Bold square
brackets indicate that you are in edit mode and can change the
setting.
CANCEL
MENU
ENTER
MENU
CANCEL
MENU
To Next Page
Loading...
