10-18 Preventive Maintenance
•
When prompted to clean the barcode reader, use one of the
cleaning swabs provided with the Barcode Reader Cleaning
Kit and rub across the barcode reader window until all dust
and other contaminants are removed.
•
At some point in the instructions, you will be prompted to
replace the receive trays and any supply cassettes.
When you have completed the cleaning instructions, the Status
screen displays and printing resumes if jobs are queued.
It is important to periodically clean components on the Horizon
imager to keep them free of dust and debris.
`äÉ~åáåÖ=íÜÉ=^êÉ~=^êçìåÇ=íÜÉ=fã~ÖÉê
Clean the area around and under the imager to keep dust out of the
cooling fans.
`äÉ~åáåÖ=íÜÉ=oÉÅÉáîÉ=qê~óë
Remove the receive trays. Using a platen roller wipe (refer to
“Horizon Cleaning Kits” on page 10-2), clean the receive trays of
any dust or debris. Use compressed air to blow inside the sheet
metal at the inside bottom of the receive trays—referred to as the
hide track
—to remove any dust, then wipe the trays. (When printing
a
ChromaVista
sheet, the imager advances the unfinished sheet
into the hide track for all but the final color pass).
CAUTION
Use only cleaning swabs from a Barcode Reader Cleaning Kit.
dÉåÉê~ä=`äÉ~åáåÖ=mêçÅÉÇìêÉë
To Next Page
Loading...
