4-8 Media Handling and Storage
When the ribbon on the ribbon spools has been consumed and
needs to be changed:
•
The imager enters the Alert state.
•
The word “OUT” flashes in the Status screen title bar next to the
ribbon symbol ( ) instead of displaying the ribbon type.
•
A message indicating that a new ribbon needs to be loaded is
displayed in the Status window.
1. Press the key.
The Main Menu displays.
2. Select the
Load/Remove Ribbon
menu option.
After selecting this option:
•
The imager pauses, first completing the sheet if one is
currently printing.
•
The ribbon supply spool inside the imager rises.
•
After up to a minute to allow the thermal print head to cool,
the imager cover pops partially open.
3. Lift the cover all the way open, and locate the ribbon spools.
`Ü~åÖáåÖ=íÜÉ=oáÄÄçå=E`Üêçã~sáëí~F
WARNING With the imager cover open, touch only those internal components
that are colored green (refer to the figure on page xxxii). Remove rings, ties,
jewelry, and other items, and tie back hair, so that they do not fall into or get
caught in the imager.
8
To change the
color ribbon
MENU
To Next Page
Loading...
