Horizon Imager User’s Manual 4-11
Media Handling and Storage
7. When you are finished changing the ribbon, close the top cover.
After several seconds, the imager will leave the paused state and
resume printing.
TIP:
You can leave the ribbon in the imager
The only time you need to remove the ribbon is if you are cleaning internal components or
the ribbon has been consumed. Otherwise, you can leave the ribbon in the imager, even
when printing to
DirectVista
grayscale media.
CAUTION
Used ribbon retains the negative of the color images that were printed
using that ribbon. If you are required to ensure patient confidentiality and privacy, the
ribbon should be destroyed.
/
To Next Page
Loading...
