xxvi Preface
bpa=`~ìíáçå
Connections to other pieces of equipment are made at the rear of
the Horizon imager. These connectors are marked with a
precautionary ESD warning symbol, as shown below. Do not touch
any of the pins of these connectors. When making connections to
the imager, it is best done while the imager is plugged in but not
powered on. ESD may cause erratic behavior of the imager when
powered on. Should this occur, power to the imager may have to be
cycled. It is recommended that all staff involved in making
connections to the imager be aware of these ESD precautions.
Rear panel
mçíÉåíá~ä=Ñçê=o~Çáç=cêÉèìÉåÅó=fåíÉêÑÉêÉåÅÉ=
çå=fã~ÖÉê= léÉê~ íáçå
Both portable and mobile RF communications equipment can affect
medical electrical equipment, including the Horizon imager. Keep
such RF communications equipment out of the immediate area.
CONSOLE
UPS
To Next Page
Loading...
