Horizon Imager User’s Manual 5-5
Printing from DICOM
Applications
How you select a Horizon imager as a destination, then send a print
job to it, is unique to your specific DICOM user application. For
details, refer to your key operator, DICOM user application vendor,
or the accompanying DICOM application documentation.
péÉÅáÑóáåÖ=íÜÉ=jÉÇá~=qóéÉ=~åÇ=páòÉ
Typically, you will set the media type and size to use for a given
print job from within the DICOM user application. However, if your
DICOM user application does not support making these settings,
you have two other options:
•
Simply send the print job. The Horizon imager can determine
whether the image is grayscale or color. The imager will then
use the default media type/size defined for the image type. For
more information about how to define the default media
type/size to use for grayscale and color images, refer to
“Changing the Default Media Type and Size” on page 8-3.
•
Use a Job Settings file that specifies the media type/size that you
want to print to. For more information on Job Settings files, refer
to the next topic.
pÉåÇáåÖ=~=af`lj=mêáå í=gçÄ
To Next Page
Loading...
