Horizon Imager User’s Manual 3-7
Basic Imager Operations
mçïÉêáåÖ= lÑÑ=íÜÉ=fã~ÖÉê
1. Press the (power) key at the control panel.
The Power menu displays.
NOTE:
To cancel the power off at this point, press the key or the key.
2. Select the
Power Off
option.
Shutdown messages are displayed. When the shutdown
operation is complete (approximately one minute), the imager
powers off.
NOTE:
Always use the
key at the control panel to power on/off the imager. The power
rocker switch at the back of the imager should always be in the
1
(on) position, unless the
imager is being serviced or moved.
Power
Power Off
Reboot
8
To power of
the image
3
CANCEL
3
To Next Page
Loading...
