Codonics Horizon - Changing Horizon PostScript Parameters-Windows NT

6-12 Printing via PostScript
`Ü~åÖáåÖ=eçêá òçå=mçëípÅêáéí=m~ê~ãÉíÉêëÔtáåÇçïë kq
NOTE: This procedure assumes that the PostScript driver for the Horizon imager has
already been installed on the workstation. For more information, refer to the “Windows NT
Driver Installation—Horizon” Technical Brief.
1. Initiate the print job from the Windows application.
The Print dialog box displays.
2. Make sure that the Horizon imager is the selected printer.
3. Click the Properties button.
The Document Properties dialog box displays, with the Page
Setup tab selected.
4. To specify the media size and type combination, select one of
the Horizon paper/white film choices from the Paper Size
drop-down list. The Horizon media choices begin with “HZ.”
3
8
To change the
PostScrip
t
parameters in
Windows NT