Horizon Imager User’s Manual 6-11
Printing via PostScript
8. To change a parameter’s setting, select the parameter from the
Printer Features
list.
The available choices are listed in the
Change setting for
drop-down list.
9. Select the desired setting from the
Change setting for
list.
10. When you are done changing settings, click
OK
to save your
changes.
The settings you have saved will be in effect for the current
session of the application from which you are printing. If you
open a new session of the application or print from a different
application, the parameters revert to their default settings.
To Next Page
Loading...
