Horizon Imager User’s Manual 6-5
Printing via PostScript
kçíÉë=^Äçìí=`Ü ~åÖáåÖ=mçëípÅêáéí=m~ê~ãÉíÉêë
•
There are other, non-Horizon-related parameters included in the
set of available PostScript print parameters. Because
unpredictable results may occur, it is recommended that you
change the defaults for only those Horizon imager parameters
listed in Table 6-1 on page 6-6.
•
Some of the “Allowed Values” shown in Table 6-1 may depend
on available imager options and thus may not appear on some
systems.
•
Settings made at print time via the Print dialog boxes will take
precedence over settings made at the imager. Note, however,
that the
Use Printer Default
or
Use Current Setting in the
Printer
setting can be chosen for many of the parameters in the
Print dialog box.
To Next Page
Loading...
