Codonics Horizon - Determining Which Cassette to Use

4-6 Media Handling and Storage
When a print job is sent, the media type and size are specified in
the print job.
• If the specified media type and size are supported by the imager
and the required supply cassette is not loaded, the imager will
display a message on the Status screen prompting you to insert
the appropriate cassette or ribbon.
• If the specified media type and size are not supported by the
imager, the default type and size is used. Refer to “Changing the
Default Media Type and Size” on page 8-3 for more information
about setting the default type and size.
aÉíÉêãáåáåÖ=tÜáÅÜ=`~ëëÉííÉ=íç=rëÉ