Codonics Horizon - Specifying the Media Type and Size

Horizon Imager User’s Manual 6-3
Printing via PostScript
eáÉê~êÅÜó=çÑ=m~ê~ãÉíÉê=pÉííáåÖë=rëÉÇ=Äó=
íÜÉ=eçêáòçå =fã~ÖÉê
For PostScript print jobs, the Horizon Imager uses the following
sequence to determine the values for sheet and image parameters
to use when printing a sheet:
1. Uses the parameter settings in the PostScript print job
information.
2. For any sheet or image parameters not specified in the
PostScript print job information, uses the imager’s default
settings for those parameters. For more information about the
imager’s default settings, refer to Chapter 8.
NOTE: You can access any of the Horizon imager’s sheet and image parameters from a
Windows or Macintosh application when sending a print job. Therefore, using Job Settings
files with PostScript is not necessary and so is not supported.
péÉÅáÑóáåÖ=íÜÉ=jÉÇá~=qóéÉ=~åÇ=páòÉ
When sending a print job via PostScript, you specify the media size
and type using PostScript parameters. How you access these
parameters, and what their defaults are set to, differ depending on
which operating system you are using. For more information, refer
to the appropriate topic in this chapter.
3