Codonics Horizon - Resetting the Default User Settings

8-8 Default Print Job Settings
oÉëÉííáåÖ=í ÜÉ=aÉÑ~ìäí=rëÉê=pÉííáåÖë
You can reset the Default User Settings for all media types back to
the factory-default settings.
1. At the imager’s control panel, press and hold the key, and
while holding it press the key.
The Main Menu with administrative options displays.
2. Select the following menu options:
Default User Settings
Reset User Settings
You are prompted to confirm the reset.
3. Respond to the confirmation prompt.
The factory-default settings are restored.
8
To reset the
Default Use
r
Settings for all
media types
and sizes to
their factory
defaults

MENU