2-20 Setting Up the Imager
The Horizon imager is shipped with a
service
login account that
provides web browser and Telnet access to service utilities on the
imager. The
service
default password should be changed as soon
as possible to prevent compromising security access to the imager.
For information about the
service
login, refer to the
Horizon
Imager Technical Manual
.
Before starting normal operation of the imager, you may want to
adjust the appearance of printed images to suit the preferences of
your site. For information about how to make these adjustments,
refer to Chapter 9.
Once you have the imager initially configured as you want it using
the procedures in this chapter and Chapter 8, you should save those
configuration settings to the appropriate backup media for your
imager hardware. (Refer to “Hardware Variations” on page xli.)
If the imager settings ever become modified to an unsatisfactory
state, you can always restore the imager to these initial settings from
the backup media. Also, if the Smart Card ever fails, you can use the
backup media to restore the imager’s configuration settings.
`Ü~åÖáåÖ=íÜÉ=pÉêîáÅÉ=m~ëëïçêÇ
^ÇàìëíáåÖ=fã~ÖÉ=^ééÉ~ê~åÅÉ
p~îáåÖ=íÜÉ=`çåÑáÖìê~íáçå=pÉííáåÖë
To Next Page
Loading...
