7-4 Printing via FTP and LPR
Multiple files are placed sequentially in the cells on the sheet,
moving from left to right, top to bottom. When you send enough
images to fill the selected sheet format, the sheet is
automatically printed. (To toggle file confirmation back on,
simply enter the
prompt
command again.)
NOTE:
To force a sheet that is not full of images to print, create an ASCII text file whose
content is simply the word
print
. (It does not matter what you call the file, or whether
print
is in upper or lower case letters.) Then use the
put
command to send the text file to
the imager.
8. To send another print job using the same sheet format, use the
put
command to send the image(s) to the imager.
9. When you are finished sending images to be printed and want
to close the FTP session, enter
quit
.
There are some other common operations that you may want to
perform during an FTP session. For complete information about
how to send print jobs using FTP, refer to the
Horizon Imager
Technical Manual
.
péÉÅáÑóáåÖ=íÜÉ=jÉÇá~=qóéÉ=~åÇ=páòÉ=rëáåÖ=
cqm
To set the media type and size to use for a given print job using FTP,
you have two options:
•
Simply send the print job. The Horizon imager can determine
whether the image is grayscale or color. The imager will then
use the default media type/size defined for that image type. For
more information about how to define the default media
type/size to use for grayscale and color images, refer to
“Changing the Default Media Type and Size” on page 8-3.
•
Use a Job Settings file that specifies the media type/size that you
want to print to. For more information on Job Settings files, refer
to the
Horizon Imager Technical Manual
.
3
To Next Page
Loading...
