Horizon Imager User’s Manual 6-9
Printing via PostScript
`Ü~åÖáåÖ=eçêá òçå=mçëípÅêáéí=m~ê~ãÉíÉêëÔtáåÇçïë VU=
~åÇ jÉ
NOTE:
This procedure assumes that the PostScript driver for the Horizon imager has
already been installed on the workstation. For more information, refer to the “Windows 98
Driver Installation—Horizon” or “Windows Me Driver Installation—Horizon” Technical Brief.
1. Initiate the print job from the Windows application.
The Print dialog box displays.
2. Make sure that the Horizon imager is the selected printer.
3. Click the
Properties
button.
The Properties dialog box displays.
4. To specify the media size and type combination, go to the Paper
tab and select one of the Horizon paper/white film choices. The
Horizon media choices begin with “HZ.”
3
8
To change the
PostScrip
parameters in
Windows 98
or Me
To Next Page
Loading...
