Horizon Imager User’s Manual 3-9
Basic Imager Operations
oÉÄççí áåÖ=íÜÉ=fã~ÖÉê
Rather than powering the imager off, you may want to reboot the
imager. For example, if you suspect that an imager problem is
software-related, you could try rebooting to clear the problem.
1. Press the (power) key at the control panel.
The Power menu displays.
NOTE:
To cancel the reboot at this point, press the
key or the key.
2. Use the key to move the selector arrow to the
Reboot
option.
3. With the
Reboot
option selected, press the key.
Shutdown messages are displayed. When the shutdown
operation is complete, the imager reboots. The reboot process
takes approximately four to five minutes.
Power
Power Off
Reboot
8
To reboot the
image
3
CANCEL
ENTER
To Next Page
Loading...
